Bk-precision 4052-4055 - Programming Manual Bedienungsanleitung PDF herunterladen (Seite 19)

EXAMPLE 4 Reads channel two modulate wave parameters that STATE is OFF.

C2:SWWV?

Return:

C2:SWWV STATE,OFF

1.8. Burst Wave Command

DESCRIPTION Set or get burst wave parameters.

COMMAND SYNTAX <channel>:BursTWaVe <parameter>

<channel>:={C1, C2}

<parameter>:= {a parameter from the table below.}

Parameters

Value

Description

STATE

<state>

Enable or disable burst wave. Note if

you want to set or read burst wave

parameters you must first enable burst

mode.

PRD

When carrier wave is NOISE wave, this

cannot be set. When GATE is selected,

you cannot set this. This can be set

only when trig source is IN (internal).

STPS

When carrier wave is NOISE or PULSE

wave, you can’t set it.

GATE_NCYC

When carrier wave is NOISE, you can’t

set it.

TRSR

When carrier wave is NOISE wave, you

can’t set it. When NCYC was chosen

you can set it.

DLAY

When carrier wave is NOISE wave, you

can’t set it. When NCYC was chosen

you can’t set it.

PLRT

When GATE was chosen you can set it.

When carrier wave is NOISE, it is the

only parameter.

TRMD

When carrier wave is NOISE wave, you

can’t set it. When NCYC was chosen

you can set it. When TRSR is set to

EXT, you can’t set is.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 32 33

Kommentare zu diesen Handbüchern

Keine Kommentare

Bk-precision 4052-4055 - Programming Manual Bedienungsanleitung Seite 19

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Generatoren Bk-precision 4052-4055 - Programming Manual