Bk-precision 2532B - Manual Bedienungsanleitung PDF herunterladen (Seite 160)

160

Taking Simple Measurements

Observe an unknown signal in a circuit, display the signal quickly and

measure the frequency and peak-to-peak amplitude.

1. Using Auto set

To quickly display a signal, follow these steps:

- Press the CH1 button, set the Probe option attenuation

to 10X and set the switch to 10X on the probe.

- Connect the channel 1 probe to the signal.

- Press the AUTO button.

- The oscilloscope sets vertical, horizontal, and trigger

controls automatically. If you want to optimize the

display of the waveform,

You can adjust these controls manually till you are satisfied with

the waveforms

2. Taking Automatic Measurements

The oscilloscope can take automatic measurements of most

displayed signals. To measure signal frequency and peak-to-peak

amplitude, follow these steps:

NOTE. The oscilloscope displays relevant automatic measurements in the

waveform area of the screen based on the signal type detected.

1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 190 191

Keine Kommentare

Bk-precision 2532B - Manual Bedienungsanleitung Seite 160