Bk-precision 2532B - Manual Bedienungsanleitung PDF herunterladen (Seite 173)

173

• No signal! : The system would display this information when the

signal could not match the auto set condition. (Using in the auto

set)

• Adjust at limit! : You could adjust the pulse width by the

universal knob till the pulse width has reached min 20.0 ns or max

10.0 s.

• Location Empty! : If you have no stored waveforms or setups on

some location, the screen will display this information when you

press the “Recall” button on this location.

• USB Flash Drive Plug In! : This information will appear when

you invert the USB Flash Drive to the USB Host port.

• USB Flash Drive Pull Out! : This information will appear when

you pull out the USB Flash Drive.

• Store Data Success! : Saving setup data, waveform data or

picture data to the internal memory of the oscilloscope or USB

flash was successful.

• Ready Data Success! : Read setup data or waveform data from

the internal of the oscilloscope or USB flash successful.

• Please set Back USB to printer!

• USB Flash Drive isn’t connected! : When the “Save To” option

is set to “File” or the “Print Key” option is set to “Save Picture” in

1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 190 191

Keine Kommentare

Bk-precision 2532B - Manual Bedienungsanleitung Seite 173