Bk-precision 5492BGPIB - Manual Bedienungsanleitung PDF herunterladen (Seite 66)

SCPI Command Reference

 When the path pointer detects a colon (:) after a semicolon (;), it resets back to the root level.

 The path pointer can only move down. It cannot be moved up a level. Executing a command at a

higher level requires that you start over at the root command.

6.3 Command Reference

The following are the subsystem commands:

 DISPlay

 CALCulate

 SENSe

 SYStem

 UNIT

 TRIGger

The supported common commands are:

 *RST

 *TRG

 *IDN?

6.3.1 Measurement Commands

The measurement commands described in this section are used to acquire readings. These commands

are summarized in Table 6-1 below.

Table 6-1 Signal Oriented Measurement Command Summary

Command

Function Description

MEASure:<function>?

:CONFigure:<function>

:FETCh?

:READ?

Perform an :ABORt, :CONFigure:<function>, and :READ?

Configure instrument to the selected measurement function.

Request the latest reading.

Perform an :ABORt, :INITiate, and a :FETCh?

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 110 111

Keine Kommentare

Bk-precision 5492BGPIB - Manual Bedienungsanleitung Seite 66